Blog

Home > Return Code > Return Code 100 Reasoncode 0

Return Code 100 Reasoncode 0

Contents

If this alarm continues to occur, restart the Cisco CallManager service. Recommended ActionCheck the Cisco CallManager advanced service parameter, Change B-channel Maintenance Status to determine if the B-channel has been taken out of service intentionally; Check the Q.931 trace for PRI SERVICE If this alarm occurs again, manually reset the device. Positive means successful execution with a warning. his comment is here

If SQLCODE = 100, "no data" was found. If this alarm continues to occur after the manual reset, there may be an internal firmware error. If the device is a Cisco phone, verify that the TFTP service is running and reachable by the phone, and view the Unified CM Database Status report in Cisco Unified Reporting If the problem persists, collect SDI and SDL traces for the Cisco Database layer Monitor service and contact the Cisco Technical Assistance Center (TAC). 31 AutoRegisterDBConfigTimeout - (SCCP only) Unified CM http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.ichd100/ich2d100352.htm

Vsam Catalog Return Code Is 8 - Reason Code Is Igg0cleg-42

If cursor is declared SENSITIVE STATIC SCROLL, the row may be a hole, from which no values can be fetched. Reason Code - Enum Definitions Enum Definitions - Reason Value Definition 0 None Defined Error Message UC_CALLMANAGER-5-DChannelISV : D-channel is in service Channel ID[UInt] Unique Channel ID[String] Device Name[String] Device IP The service should restart in an attempt to clear the failure. When DB2 executes SQL statements, it returns the results of the operation into the SQLCODE and SQLSTATE fields in the SQLCA.

SQL Error Code -204 name IS AN UNDEFINED NAME.Suggestion: Correct DB2 CREATOR or OBJECT NAMEs located in SQL statements. No rollback. -922 Authorization needed. -924 DB2 Connection internal error. -927 The language interface was called but no connection had been made. -998 Error occurred during transaction or heuristic processing. Check the Security profile of the indicated device and verify that the Device Security Mode is set to either Authenticated or Encrypted. Idc3009i Return Code 50 You can also go to the Real-Time Reporting Tool (RTMT) and check the Replication Status in the Database Summary page.

SQL Error Code -305 THE NULL VALUE CANNOT BE ASSIGNED TO OUTPUT HOST VARIABLE NUMBER position-number BECAUSE NO INDICATOR VARIABLE IS SPECIFIED.Suggestion: Add null indicator variable to SELECT statement in the Vsam Catalog Return Code Is 48 The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection. Also, refer to the reason code descriptions in this alarm for additional recommended actions. http://www.ibm.com/support/knowledgecenter/SS5R93_5.2.11/com.ibm.spectrum.sc.messages/msg_iwnr5425e.html You can also issue the following command on the CLI to view database replication: utils dbreplication runtimestate. 29 AutoRegisterDBError - Auto-registration of a device failed because auto-registration is not allowed for

Recommended ActionIn the Cisco Unified Reporting tool, run a CM Cluster Overview report and check to see if all servers can communicate with the Publisher. Idcams Return Codes Collect existing SDI and SDL traces and contact the Cisco Technical Assistance Center (TAC). 28 FallbackInitiated - The device has initiated a fallback and will automatically re-register to a higher-priority Unified The device will automatically attempt to register again. In cases of normal unregistration with reason code 'CallManagerReset', 'CallManagerRestart', 'DeviceInitiatedReset', 'EMLoginLogout', or 'EMCCLoginLogout', the severity of this alarm is lowered to INFORMATIONAL.

Vsam Catalog Return Code Is 48

The registration profile of the device did not get inserted into the database in time. https://www.ibm.com/support/knowledgecenter/SSLTBW_1.13.0/com.ibm.zos.r13.idac100/c1056.htm Go to the Cisco Unified Reporting web page, generate a Unified CM Database Status report and verify "all servers have a good replication status". Vsam Catalog Return Code Is 8 - Reason Code Is Igg0cleg-42 Verify that the Product Type on the Phone Configuration page in Unified CM Administration matches the model number of the phone. Vsam Catalog Return Code Is 68 If the device is a third-party SIP device, verify that the digest credentials configured on the phone match the Digest Credentials configured in the End User Configuration page. 11 InvalidX509NameInCertificate -

If this alarm continues to occur after the manual reset, there may be an internal firmware error. this content If you are not planning to auto-register phones, either manually configure the phone (Device > Phone > Add New), power the device down, or remove it from the network. Enum Definitions - IPAddrAttributes Value Definition 0 Unknown - The device has not indicated what this IPv4 address is used for 1 Administrative only - The device has indicated that this SQL Return Code +231 CURRENT POSITION OF CURSOR cursor-name IS NOT VALID FOR FETCH OF THE CURRENT ROW.Suggestion: Be certain to FETCH to position on a row after opening a cursor. Vsam Catalog Return Code Is 48 - Reason Code Is Igg0clfo-28

GET DIAGNOSTICS also passes a text message about SQLCODE directly to programs. If the problem persists, collect SDI and SDL traces for the Cisco Database layer Monitor service and contact the Cisco Technical Assistance Center (TAC). 31 AutoRegisterDBConfigTimeout - (SCCP only) Unified CM SoftBase is a Registered Trademark. http://getbetabox.com/return-code/r04-ach-return-code.html Verify that the TFTP service is activated.

Prior to DB2 V8, COBOL programs could call a subroutine called DSNTIAR that would convert a SQLCODE in the SQLCA into more a detailed text message with diagnostics about the return Igd17103i If the device is a Cisco phone, verify that the TFTP service is running and reachable by the phone and view the Unified CM Database Status report in Cisco Unified Reporting Reason Code - Enum Definitions Enum Definitions - DeviceType Value Definition 1 CISCO_30SP+ 2 CISCO_12SP+ 3 CISCO_12SP 4 CISCO_12S 5 CISCO_30VIP 6 CISCO_7910 7 CISCO_7960 8 CISCO_7940 9 CISCO_7935 12 CISCO_ATA_186

Possible causes include device power outage, network power outage, network configuration error, network delay, packet drops, and packet corruption.

Verify that the device is powered up and operating, verify that network connectivity exists between the device and Unified CM, and verify that the CPU utilization is in the safe range Also, check the Phone Configuration page to determine whether the phone is associated with the specified end user in the Digest User drop box. Check DB2 Master Log for more details on the resource name – contact DBA. Iec331i If the device is a Cisco phone, verify that the TFTP service is running and reachable by the phone and view the Unified CM Database Status report in Cisco Unified Reporting

Reason Code - Enum Definitions Enum Definitions - DeviceType Value Definition 10 CISCO_VGC_PHONE 11 CISCO_VGC_VIRTUAL_PHONE 30 ANALOG_ACCESS 40 DIGITAL_ACCESS 42 DIGITAL_ACCESS+ 43 DIGITAL_ACCESS_WS-X6608 47 ANALOG_ACCESS_WS-X6624 48 VGC_GATEWAY 50 CONFERENCE_BRIDGE 51 CONFERENCE_BRIDGE_HARDWARE Recommended actions: 1) Verify that the device is configured with the appropriate protocol; 2) Verify that the firmware load ID on the Device Defaults page in Cisco Unified CM Administration is SQL Error Code -805 DBRM OR PACKAGE NAME location-name.collection-id.dbrm-name.consistency-token NOT FOUND IN PLAN plan-name. check over here THE PROGRAM SHOULD BE INVOKED UNDER THE DSN COMMAND.

Check the REGISTER message for any of these issues and if you find one, correct the issue. 12 SCCPDeviceThrottling - (SCCP only) The indicated SCCP device exceeded the maximum number of Also, refer to the reason code definitions in the alarm for recommended actions. Unregistration also occurs if Unified CM receives a duplicate registration request for this same device.