Home > Event Id > Windows System Event Log Event Id 11

Windows System Event Log Event Id 11


After troubleshooting the disk and possible bad IDE cable, it turned out that the enclosure was bad. Note that it can also be caused by using consumer grade drives with a RAID controller that expects writes to complete quickly. I found the cause to be a USB Compact Flash card reader. x 126 Kane I've been encountering this problem for ages.

This event ID was accompanied by EventID 9 Source adpu160m, EventID 117 from source adpu160m, and EventID 10026 from source DCOM. They checked everything we did, drivers, diagnostics, etc. If so, I encourage you to decline the king of the wild goose chases crown. Usually this error has to do with a Driver. check this link right here now

Event Id 11 Disk The Driver Detected A Controller Error

I run ms cluster on two pc. TECHNOLOGY IN THIS DISCUSSION Microsoft 502892 Followers Follow Microsoft Windows Server Microsoft Windows Server 2012 Join the Community! This could be the key to the answer. 0 Message Author Comment by:Jsmply ID: 331172732010-07-01 Okay. They seem to think it's either related to the Seagate drive sleep setting, or just the way the bridge card on the drives work.

Collatz Conjecture (3n+1) variant Code Coverage Calculation - Seems to be including code in test methods How can I monitor the progress of a slow upgrade? 3% personal loan online. that should help. also check for any drive issues in device manager. Event Id 11 Atapi Think of it this way though, it happens when you ask to safely remove, so what if, to fulfill that request it's trying to flush out writes, gets a bit of

I would personally give it a try. 0 Message Author Comment by:Jsmply ID: 331309022010-07-03 Well, so far so good. Just wanted to try to exhaust all options before changing the MOBO on a brand new machine. To solve the error, a full SMART scan with repair (reallocation of unstable sectors) should be performed. Is this a scam?

That would mean it's not JUST on removal, correct? 0 Message Author Comment by:Jsmply ID: 331206952010-07-01 Hi Noxcho, doesn't look like there is anything obvious that points to that DR# Event Id 11 Wininit Attached is a screenshot of that registry area. It didn't get us very far though. Edited Apr 16, 2014 at 10:23 UTC 0 Pimiento OP yolandahornus Apr 25, 2014 at 10:29 UTC 1st Post Hola, estoy leyendolos y a mi me aparece este

Event Id 11 Windows 7

x 277 Peter Hayden In one case, a computer was running Windows 2003 that had an Adaptec Ultra 160 (19160) SCSI Adapter that was being used to control separate C: and For instance, in the following error, the matching disk to look for in Disk Management is "Disk 5". Event Id 11 Disk The Driver Detected A Controller Error In another thread we discovered a problem where snapshots were taken (VSS attempted to take them) even when they were disabled. Event Id 11 The Driver Detected A Controller Error On Device Harddisk1 Dr1 I then removed the "Remote Storage Service".

All rights reserved. this contact form Nothing wrong...I replugged the DriveStation to the server, restarted the "Block Level Backup Engine Service".Anything else I could try? « Last Edit: December 23, 2013, 02:49:33 pm by fdlwebmaster » Logged The hardware problems can be associated with poor cabling, incorrect termination or transfer rate settings, lazy or slow device responses to relinquish the SCSI bus, a faulty device, or, in very Although a write using a consumer grade drive my complete successfully, the RAID controller will report a timeout. Event Id 11 Disk Controller Error

So this is normal IMHO. But in my experience this error is almost always logged for USB drives (and we see a lot of events since we do event log monitoring). If you have only one drive, ensure you do not have it configured to cable select and update to the latest IDE drivers from your motherboard manufacturer". have a peek here Nothing shows up under that process ID.

Anyone see a need on that? 0 Message Author Comment by:Jsmply ID: 331309252010-07-03 Just to clarify, we are talking about the sleep mode on the seagate drive itself via their Event Id 11 Custom Dynamic Link Libraries Zoomed to 200% in Word it should be easy to read. x 275 Corey Monteiro Boot-up was also very slow when these errors began to occur.

Prior to finding out about this bug, I temporarily resolved the problem by defragging my hard drive to reduce disk I/O".

Just a basic disk system. –Guy Thomas May 14 '10 at 11:48 The disk controller can still be bad on the motherboard. This took care of the errors in Event Viewer. Notably missing from the new interface is a Start button and Start Menu. Event Id 11 Kdc Duplicate Names x 353 Anonymous I got this error after buying a new power supply.

They both have scsi terminal enabled in scsi bios, scsi bus reset disabled. Why is my scene rendered repeatedly when I press F12? I ran full diagnostics on my two hard drives (a 250GB Deskstar SATA with 3 partitions that came with the system and a 120GB ATA Barracuda with 2 partitions that I Since I removed the drives from the caddies and connected the IDE cable directly to the drives the error has not reoccurred since.

Artikel-ID: SLN167235 Senast ändrad: 07/14/2015 10:21 AM Betygsätt den här artikeln Korrekt Användbart Lätt att förstå Var den här artikeln till nytta? I use DISKPART: CMD > DISKPART list disk 0 Pimiento OP slacka Feb 3, 2014 at 5:57 UTC 1st Post I just read all of the answers, even It doesn't seem to appear when plugged into a random workstation (just long enough to look at the folders, close it and remove it).. 0 LVL 46 Overall: Level What do you both think? 0 LVL 46 Overall: Level 46 Storage Hardware 30 Windows 7 16 Hardware 11 Message Active today Expert Comment by:noxcho ID: 331259482010-07-02 Chances that MOBO

Cheers, Derek Reply Subscribe RELATED TOPICS: The driver detected a controller error on \Device\Harddisk1\DR1. The computer is running Windows Server 2012 R2 Essentials and the two externals enclosures are connected by USB 3.0 (which has been its own headache with the disks constantly dropping out The "Harddisk5" should refer to "Disk 5" in Disk Management however. Any clue?So I'm left with the regular Windows method of enabling/disabling the sleep mode (for the record it's here: Control Panel / Device Manager / Universal Serial Bus controllers / Generic