Blog

Home > Event Id > Windows 2003 Server Event Id 1053

Windows 2003 Server Event Id 1053

Contents

Error code 1355 (The specified domain either does not exist or could not be contacted) This error code might indicate a fault or improper configuration with name resolution (DNS). On the DC everything looked fine, even Exchange Web Access worked well. The old domain was still active and accounts from that domain were listed in local groups to a computer in the new domain. x 113 John Currie In my case it was the "Receive Side Window Scaling" issue that crops up with Windows Server 2003 SP2 & Broadcom NICs. Source

When the Intel Pro Nic in my server came up, it did not wait for spanningtree to put the port in forwarding mode, causing errors related to the temporary disconnect. Microsoft Admits It Went Too Far [Microsoft] by Cartel395. Privacy statement  © 2016 Microsoft. x 12 Roy Nicholson We were getting Event Id 1053 in the Application event log "Windows cannot determine the computer or user name. (Access is denied.). check my site

Event Id 1053 Error Code 1722

For this specific error, you have to enable "file and print sharing" . 0 Message Active today Author Closing Comment by:Damian_Gardner ID: 384068092012-09-17 Thanks to all for your suggestions. Need antivirus for Windows Xp (yes, I know) [Security] by dave425. When I put the server's switch port into portfast mode on my Cisco 6500 series switch, the issue was resolved". Verify Group Policy applies during computer startup and user logon.

I also tried gpupdate with the firewall switched off to no avail. Same error.That should have fixed it if it were a corrupt DNS table, but it didn't, so I'm not sure where to go from here. The problem in our case was that the security settings were too hard. Group Policy 1053 Error Code 1722 Ad Choices ThemeWelcome · log in · join Show navigation Hide navigation HomeReviewsHowChartsLatestSpeed TestRun TestRun PingHistoryPreferencesResultsRun StreamsServersCountryToolsIntroFAQLine QualitySmoke PingTweak TestLine MonitorMonitor GroupsMy IP isWhoisCalculatorTool PointsNewsNews tip?ForumsAll ForumsHot TopicsGalleryInfoHardwareAll FAQsSite FAQDSL FAQCable

You can use the links in the Support area to determine whether any additional information might be available elsewhere. The error code (displayed as a decimal) and error description fields further identify the reason for the failure. x 5 Craig Curtis Error: "The specified user does not exist" (Error code 1317) -Verify the DNS Settings. We opened the firewall to allow client authentication and the problem was solved.

Investigate the system event log for any other memory-specific issues. Event Id 1053 Error Code 1355 Group Policy processing aborted. All rights reserved. JRod "Exclusively cybersocial" Ars Tribunus Militum Tribus: The great white north Registered: Jun 16, 2005Posts: 1504 Posted: Wed Oct 04, 2006 7:29 pm quote:seems to be unable to process group policy

Event Id 1053 Group Policy

DHCP registers DNS.For testing purposes, I set DC2 to point to itself for primary DNS. The user requires read access to the organizational unit that contains the user object. Event Id 1053 Error Code 1722 Concepts to understand: What is the Group Policy? Event Id 1053 Not Enough Storage Is Available To Complete This Operation Thank you Win 10 [Microsoft] by David3941262.

Event Details Product: Windows Operating System ID: 1053 Source: Microsoft-Windows-GroupPolicy Version: 6.0 Symbolic Name: gpEvent_FAILED_USERNAME Message: The processing of Group Policy failed. this contact form If the PC aint working and you just joined it, check the computer account is registered properly in AD under "computers".One sure sign if an F'd up DNS setup is if CRTC ruling and its effects in rural canada [TekSavvy] by ddonais200. I tried resetting both the domain and domain controller group policy settings as well as resetting the user rights to no avail. Event Id 1053 The Service Did Not Respond To The Start

It was a domain controller that that had been restored from an image for testing purposes. Email Reset Password Cancel Need to recover your Spiceworks IT Desktop password? Join the community of 500,000 technology professionals and ask your questions. http://getbetabox.com/event-id/event-id-1053-rpc-server-is-unavailable.html Recommend Us Quick Tip Connect to EventID.Net directly from the Microsoft Event Viewer!Instructions Customer services Contact usSupportTerms of Use Help & FAQ Sales FAQEventID.Net FAQ Advertise with us Articles Managing logsRecommended

Using gpupdate (ME823659), I was able to reproduce the error. Windows Cannot Determine The User Or Computer Name Access Is Denied Click Command Prompt. I've seen replication take up to half an hour depending on health of the domain and the quality of the copper between sites.

I've tried deleting the zones on DC2, uninstalling the service and then reinstalling, recreating the zones.

The solution ultimately came from all three articles. I'm stumped!Thanks,Mike · actions · 2006-Jan-28 10:34 pm · BillRolandPremium Memberjoin:2001-01-21Ocala, FL BillRoland Premium Member 2006-Jan-28 11:01 pm I'm sure you already tried this, but just in case,»www.eventid.net/display. ··· &phase=1 · I don't know if this is the cause of the jobs not running correctly, but it definitely is a new error. 0 Comment Question by:Damian_Gardner Facebook Twitter LinkedIn https://www.experts-exchange.com/questions/27864371/Event-1053-Userenv-error.htmlcopy LVL 38 Event Id 1053 Starting Service In another post: "Apparently, the user of this machine configured his TCP/IP settings with static addresses and did not include the proper IP address of the domain controller for his DNS

The GPO settings for the security event log were set to "Do not overwrite events (clear log manually)". New computers are added to the network with the understanding that they will be taken care of by the admins. Go to Solution +1 4 Participants ChiefIT LVL 38 Windows Server 200333 Active Directory17 Windows Networking15 Sushil Sonawane LVL 18 Active Directory8 Windows Server 20036 Windows Networking3 sarang_tinguria LVL 18 Active http://getbetabox.com/event-id/windows-server-2003-event-id-26.html To check this, at a command prompt (Start > Run > cmd) type "ipconfig /all".

You will know when you have the right set when you get the advanced tab on the connection properties page. I restarted the netlogon service and this solved my problem. Unfortunately I don't have the full text of the error at the moment and can't recall it off the top of my head.What should I be checking in relation to this While in the DNS console everything looked fine, in the SBS administration console, Computer management (local), Service and application, DNS there was something different: The zone was pointing to another address.

Use nslookup to confirm you can resolve addresses of the domain controllers in the user domain. pcgeek86 Ars Tribunus Angusticlavius Registered: Jan 4, 2006Posts: 6616 Posted: Thu Oct 05, 2006 5:06 am quote:Originally posted by Triggerhappy:One sure sign if an F'd up DNS setup is if it Creating your account only takes a few minutes. In addition, did you encounter the DNS name resolution issue?

The network configuration was correct but it was being used stand-alone and was not connected to a network. The network configuration had been cleared when TCP/IP was reinstalled.